The ProfiMix EN001 pump group is a ready-to-install, professional pump group for heating circuits such as underfloor heating, wall heating, radiators, etc. with a built-in three-way mixer made of brass and an Environ END05 servomotor. A 180mm high-efficiency pump is installed (BAFA-eligible). In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C) and an integrated gravity brake in the flow line.

If the pump group is installed individually, a wall bracket can be screwed onto the shut-off valves (not included). Maintenance or replacement of the circulation pump is very easy without having to drain the system.

The center distance is 125mm and the dimensions of the lower connections are 1½" AG for possible direct installation on a conventional distribution beam. The sophisticated thermal insulation made of EPP, with a vapor barrier system, ensures an optimal climate inside the insulation so that no heat build-up occurs.

With a simple movement of the hand it is possible to switch from heating mode to cooling mode. If several pump groups from the ProfiMix series are used, the individual insulation elements together with the distributor bar form an elegant, perfect unit.

▸ Flow rate: 1,600 L/H
▸ Max. temperature: 110°C
▸ Min. temperature: 10°C
▸ Kvs: 8.3
▸ Dimensions: 400 x 250 x 240 mm
▸ Axle distance: 125mm
▸ Nominal size: DN 25 - 1”
▸ Consumer connections: 1" IG
▸ System connections: 1 1/2" AG
▸ Max pressure: 6 bar
▸ Medium: Usable liquids: water, glucol solutions (glucol max 50%)
▸ Pump type: high-efficiency pump
▸ Pump mounting length: 180mm
▸ Power supply: 230V
▸ Insulation material: EPP
▸ Thermometer scale: 0-160°C
▸ Max temperature: 120°C
▸ built-in check valve ✓
▸ Insulation material: EPP 40 g/l
▸ Sealing set: EPDM
▸ Body material of the heating circuit station: brass / refined quality steel

The Environ Clima500 is a weather-controlled heating controller with a mixed and an unmixed heating circuit, as well as systems with a water-bearing fireplace or wood boiler, buffer storage and mixed heating circuit. In addition, Clima500 can request another heat generator (e.g. NT boiler). By determining the various temperatures, a system diagram of the following description is selected. The individual parameters are set via the menu navigation. When the system is first started up, the mixer is set to "CLOSED". It then automatically adjusts to the selected setting. The same applies in the event of a power failure.

Key features of Clima500
✓ Display of graphics and texts in the illuminated display
✓ Easy query of the current measured values
✓ Extensive setting menus
✓ Menu lock to prevent unintentional changes

Technical data
• Mains voltage: 230 Vac
• Mains frequency: 50 Hz
• Power consumption: 2A
• Relay output power: 5A 250 Vac
• Internal fuse: 3.15 A
• Protection class: IP40
• Measuring range: -40°C to 300°C

  ✓ Ready-to-install Environ Profimix pump group 3-way mixer Esbe ARA + Wilo Wilo Para 25/6 180mm high-efficiency pump and Environ Clima500 with sensor set

Technical data Environ EcoStar 25/6 high-efficiency pump:

▸ Max. delivery height: 6m
▸ Max flow rate: 3.6m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 3W-43W
▸ Operating pressure: max. 10 bar
▸ Electrical connection: 230V/50HZ
▸ Supply voltage: 220~240V, 50/60Hz
▸ Protection level: IP44
▸ Insulation class: H
▸ EMC standard: EN61000-6-1 and EN61000-6-3

Technical data Wilo Para 25/6:

▸ Max. delivery height: 6m
▸ Max flow rate: 3.6m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 3W-43W
▸ Operating pressure: max. 10 bar
▸ Installation length: 130 mm
▸ Electrical connection: 230V/50HZ

Technical data Wilo Para STG 25/8.75 130mm:

▸ Max. delivery height: 8.4m
▸ Flow rate max: 4m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 10W-75W
▸ Operating pressure: max. 10 bar
▸ Pipe connection: DN 25 -> 1" or approx. 33mm
▸ Union: G 1 1/2" (spanner size approx. 53mm)
▸ Pump thread: 1 1/2" or approx. 48mm
▸ Installation length: 180 mm
▸ Electrical connection: 230V/50HZ

Technical data Grundfos UPM3 Hybrid 25/7 130mm:

▸ Max. discharge head: 7.2m
▸ Max. flow rate: 3.8m³/h
▸ Medium temperature: max. 110°C
▸ Ambient temperature: 0°C...55°C
▸ Operating pressure: max.10 bar
▸ Installation length: 130 mm
▸ Power: 2W-52W
▸ Gear stages: regulated
▸ Electrical connection: 230V/50HZ
▸ Insulation class: F

Manufacturer information:

ENVIRON Energie- und Umwelttechnik GmbH & Co. KG

Robert-Bosch-Straße 9

78048 Villingen-Schwenningen

Phone: +49 7705 977 5803

E- Mail: info@environgroup.de
Website: https://environ-solutions.de/