The Thermoreflux X pump group is a ready-to-install, compact return flow increaser/loading valve unit for maintaining the boiler and return flow temperature for all common boiler sizes from 5 kW to 80 kW nominal output. Electronically controlled with built-in three-way mixer made of brass. An Elodrive 20-80°C electronically controlled servomotor is installed. A Wilo Para 25/6 high-efficiency pump is also installed. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C).

It is a ready-to-install group that regulates itself using the control sensor.

▸ Flow rate 1,600 l/h
▸ Max. temperature: 110°C
▸ Max. pressure: 6 bar
▸ Min. temperature: 10°C
▸ Kvs: 8.3
▸ Ball valves: Brass CW617N
▸ Insulation material: EPP 38 g/l
▸ Thermal conductivity 0.038 W/mK
▸ Fire protection class: ISO 3795
▸ Sealing set: EPDM
▸ Consumer connections: 1" IG
▸ System connections: 1 1/2" AG

Technical data Wilo Para 25/6:

▸ Max. delivery height: 6m
▸ Max flow rate: 3.6m³/h
▸ Temperature range: -20°C to +110°C
▸ Power consumption: 3W-43W
▸ Operating pressure: max. 10 bar
▸ Installation length: 130 mm
▸ Electrical connection: 230V/50HZ

Technical data Elodrive 20-80°C Electronic controller:

▸ Nominal voltage 230Volt, 50Hz
▸ Power consumption 3.5VA (3.5Watt)
▸ Cable with Schuko plug 2m
▸ NTC sensor hard-wired, length 1m
▸ Temperature setpoint setting +20°C to +80°C
▸ Internal temperature limit +60°C or 70°C
▸ Status and error display red and green LED
▸ Torque 6Nm
▸ Manual adjustment via release button
▸ Running time 135 seconds 90°
▸ Position indicator two-color, reversible
▸ Protection class II, protective insulation
▸ Protection class IP40
▸ EMC CE according to 2004/108/EC
▸ Low Voltage Directive CE according to 2006/95/EC
▸ Ambient temperature 0°C to +50°C
▸ Maintenance maintenance-free
▸ Housing material PC (polycarbonate) glass fiber reinforced

✓ Ready-to-install Thermoreflux X return flow increase with electric actuator Elodrive 20-80°C controller and Wilo Para 25/6 high-efficiency pump

Manufacturer information:

ENVIRON Energie- und Umwelttechnik GmbH & Co. KG

Robert-Bosch-Straße 9

78048 Villingen-Schwenningen

Phone: +49 7705 977 5803

E- Mail: info@environgroup.de
Website: https://environ-solutions.de/