The Thermoreflux X60 pump group is a ready-to-install, compact return flow booster / loading valve unit for
Maintaining the boiler and return temperature for all common boiler sizes from 5kW to 50kW nominal output. Thermally controlled with built-in three-way mixer made of brass.

A Grundfos UPM3 Hybrid 25/7 130mm high-efficiency pump is installed. In the upper area of ​​the pump group there are flat-sealing shut-off valves (1" IG) with built-in thermometers (0-160°C).

If the pump group is installed individually, a wall bracket can be screwed onto the shut-off valves (not included in delivery). The sophisticated thermal insulation made of EPP ensures an optimal climate inside the insulation, so that
no heat build-up occurs.

Manufacturer information:

ENVIRON Energie- und Umwelttechnik GmbH & Co. KG

Robert-Bosch-Straße 9

78048 Villingen-Schwenningen

Phone: +49 7705 977 5803

E- Mail: info@environgroup.de
Website: https://environ-solutions.de/

▸ Flow rate: 1,050 l/h
▸ Max. temperature: 110 °C
▸ Max. pressure: 6 bar
▸ Min. temperature: 10 °C
▸ Kvs: 3.2
▸ Brass ball valves: (CW617N)
▸ Insulation material: EPP 40g/l
▸ Thermal conductivity: (λ 40”C) 0.038 W/mK
▸ Fire protection class: ISO 3795
▸ Sealing set: EPDM
▸ Consumer connections: 1” IG
▸ System connections: 1”½ AG

Technical data Grundfos UPM3 Hybrid 25/7 130mm:

▸ Max. discharge head: 7.2m
▸ Max. flow rate: 3.8m³/h
▸ Medium temperature: max. 110°C
▸ Ambient temperature: 0°C...55°C
▸ Operating pressure: max.10 bar
▸ Installation length: 130 mm
▸ Power: 2W-52W
▸ Gear stages: regulated
▸ Electrical connection: 230V/50HZ
▸ Insulation class: F

✓ Environ Thermoreflux X60 return flow increase with Herz fixed value thermostat 60°C with Grundfos UPM3 Hybrid 25/7 130mm